Hurd Windows and Doors

AWNING WINDOWS

Construction:

• Basic jamb width 4-9/16"
• DLX-dual arm operator (standard on Clad)
• Concealed sliding nylon shoe hinges applied directly to sash
• Gear operator provides smooth operation
• Stainless steel hinge track for maximum support
• Guide bar operable system

Sash locks standard on 43" glass widths and wider units, optional on smaller widths

Weatherproofing

• Perimeter weatherstrip on sash

CASEMENT WINDOWS

Construction:

• Basic jamb width 4-9/16"
• Dual arm operator opens 90 degrees
• DLX-single lever lock system w/dual arm operator (standard on Clad and 31" glass width units)
• Split arm operator on Wood units (standard with two locks on 43" callout heights and taller units)
• Gear operator provides smooth operation
• Stainless steel hinge track for maximum support
  

Weatherproofing

• Perimeter weatherstrip on sash
• Positive locking mechanism draws sash tight against weatherstrip

Concealed sliding nylon shoe hinges applied directly to sash

DOUBLE HUNG WINDOWS

Construction:

• Easy-tilt top and bottom sash
• Basic jamb width 4-9/16"
• Foam-backed liners
• Block and tackle balance mechanism
  

Flush Mounted Locks: Positive locking mechanism (two locks on 32" glass widths and wider units) and a fingertip groove milled in bottom rail.

Weatherstrip located on top and bottom rails, headjamb, top checkrail and bottom stiles. Interlocking sash at meeting rail

Balance Color: White or Almond

SINGLE HUNG WINDOWS

Construction:

Premium:

• Easy-tilt bottom sash on Premium Single Hung
• Basic jamb width 3-1/4"
• Covered block and tackle balance system
• Low-profile sash lock (two locks on 36" callout widths and wider units)
• Sloped sill
• Aluminum reinforcing standard at meeting rail
• Fingertip lift at top rail of bottom sash
• Bottom and top sash have equal sight lines
  

Builders Classic:

• Basic jamb width 2-7/8"
• Covered block and tackle balance system
• Low-profile sash lock (two locks on 36" callout widths and wider units)
• Aluminum reinforcing standard at meeting rail
• Fingertip lift at top rail of bottom sash
• Side loading sash
• Glass glazed directly into top half of frame
• Interlocking sash at meeting rail

Balance Color: Matched to unit

Snap-on Accessories: Vinyl brickmoulding, end caps, mull connectors, extention jamb clips, nailing fin adaptors and more

Craftsmanship is in the details

SPECIAL SHAPES

Construction:

• Basic jamb width 4-9/16"
• Basic jamb width 5" for shapes over sliding patio doors

Additional Features:

• Extension jambs up to 7-3/8"
• Extruded aluminum drip cap Pine and oak interior casing Pine and oak rosettes Contact Hurd for all your special shape needs.
  

SLIDING DOORS

Construction:

• Available as a Sliding door and as a Sliding French door with wider bottom rail
• Basic jamb width 4-9/16" (5" for Wood)
• Retro and 6'10" height door panels, reversible for right or left sliding requirements (not including French)
• Sloped fiberglass sills
• Fully adjustable tandem steel ball-bearing rollers
• Available set-up (1-Lite and 2-Lite only) or knocked down
• Weatherstrip system at meeting stiles, sides and bottom
• Pultruded fiberglass sill design

SWINGING DOORS

Construction:

• Available as Inswing, Dual Inswing, Outswing or Dual Outswing
• Basic jamb width 4-9/16"
• Sash profile width 4-1/2"
• 7-1/2" bottom rail on 6'10", 7'2" and 8'0" height panels
• Fiberglass sill
• Sturdy adjustable hinge system on Inswing doors
• Outswing doors have brass hinges
• Doors have mortise lock and keyed deadbolt with 2-3/8" backset
• 3-point locking hardware option on all heights and Dual Swing doors and as standard on all 7'2" and 8'0" height panels
• Dual Swing units have two operable panels
• Perimeter weatherstrip on operable and fixed panels
• Purtruded fiberglass sill design